CCT 01 · Residential · Edmonton
Residential Electrical
From a single dead breaker to a full panel swap, this is what we do most days of the week. Edmonton homes, old and new, infill and acreage. Code-compliant per the Canadian Electrical Code, inspection-ready, and labeled when we leave.
Overview
The honest scope of residential work.
A house has electrical for the same reason a car has wiring: to deliver power where it’s needed, safely, without surprises. Most calls we take fall into one of three buckets. Something stopped working, something needs to be added, or something old needs to be brought up to code.
We handle all three. We walk the job with you, write up what we see, and quote it before we touch a screwdriver. If we think you can skip a step, we’ll say that too. The goal is a finished panel that anyone (the next electrician, the home inspector, you) can open and immediately understand.
What’s included
- 200A service entrance upgrades
- Panel replacements and subpanels
- Knob-and-tube replacement
- Aluminum wire pigtailing (CO/ALR)
- Basement rough-ins and finished work
- Kitchen and bathroom renovations
- AFCI and GFCI compliance per CEC 26-700
- Hot tub, sauna and pool circuits
- Outlet and switch replacement
- Ceiling fan and fixture installation
- Doorbell, smoke and CO detector wiring
- Diagnostic troubleshooting
When you’ll want to call us
Breakers tripping more than they used to. Lights dimming when the dryer or microwave runs. A panel with screw-in fuses, a Federal Pioneer Stab-Lok, or a Zinsco. Buying a house and the inspector flagged the wiring. Renovating and the existing service can’t carry the new load. Adding a hot tub. Finishing a basement. Hearing a sizzle in a switch. Any of those, give us a call.
What we won’t do
We won’t sell you a panel upgrade you don’t need. We won’t recommend ripping out wiring that’s serviceable just because it’s old. And we won’t quote a job over the phone we haven’t seen, because that’s how people get burned. We come look, then we quote.
Process
How a residential job actually goes.
- 01
Walk and look
We come to the house, open the panel, look at the run and ask what you’ve been seeing. No charge for the visit on most jobs.
- 02
Written quote
A line-by-line written quote within 24 hours. Materials, labour, permit, inspection. No phantom fees.
- 03
Schedule and permit
If the job needs a permit, we pull it. We give you a start date and we show up that morning.
- 04
Install and inspect
We do the work, label the panel, clean up and book the inspector. You get the final paperwork when it passes.
Related services
Often paired with this work.
Lighting Installation
Pot lights, statement fixtures and dimmers. Usually goes hand in hand with reno work or a basement build.
- LED pot light layouts
- Chandeliers up to 22 ft
- Exterior and soffit lights
EV Charger Installation
A Level 2 charger in the garage often triggers a service capacity review or panel upgrade.
- Any Level 2 brand
- Load calc on your panel
- Permit included
Smart Home Wiring
Smart switches, smart panels and lighting scenes. Easiest to wire in during a renovation.
- Lutron, Leviton, Kasa
- Span smart panels
- Apple, Google, Alexa
Burnt smell? Sparking outlet? Breaker won’t reset?
Don’t wait on it. Call right away, including after hours. Leave your name, address and what’s going on and we call back fast.
Get in touch
Got a residential job?
Call or email. We’ll come look, quote it honestly, and leave the panel labeled.